Extron SMX 200 Frame RPS MultiMatrix Switcher driver for Windows 7 - Extron SMX 200 Frame RPS MultiMatrix Switcher dri

Extron SMX 200 Frame RPS MultiMatrix Switcher 1.20

Extron SMX 200 Frame RPS MultiMatrix Switcher driver from Extron for OS Independent

Extron SMX 200 Frame RPS MultiMatrix Switcher driver from Extron for OS Independent

Publisher review for Extron SMX 200 Frame RPS MultiMatrix Switcher 1.20:

Before install Extron SMX 200 Frame RPS MultiMatrix Switcher 1.20you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron SMX 200 Frame RPS MultiMatrix Switcher . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron SMX 200 RPS Frame MultiMatrix Switcher Firmware version 1.20.Fixes:- Corrected the Output Noise Issue – In prior versions of firmware, when the output is un-tied some sensitive monitors would not sleep and other products reported active signal. When tied, noise could appear intermittently. This issue has been resolved in v1.20.
- Corrected the 3D compatibility Issue – In prior versions of firmware, the SMX could not switch some 3D sources. This issue has been resolved in v1.20 by updating the 3D InfoFrame data.
- Corrected the SIS Input HDCP Authorization Issue – In prior versions of firmware, when the source is looped back to the matrix or comes from an XTP or DXP matrix, the SIS input HDCP authorization (off) command did not work. It would continue to output the source. Disabling the HDCP from the main source functioned properly. This issue has been resolved in v1.20 by outputting a green screen when disabled.
Installation steps:1. Download the firmware files.
2. Access the SMX Web pages.
3. Select the Configuration tab.
4. On the Configuration page, click the Firmware Upgrade link on the left sidebar menu.
5. Click the Browse button. A Choose File window opens.
6. Navigate to the folder where you saved the firmware upgrade file. Select the file.
7. Click Open .
8. On the Firmware Upgrade page, click the Upload button. While the firmware is uploading, the Upload button changes to Uploading... . When the uploading process is complete, the button changes back to Upload . The process may take a few minutes.
Important notice:- Valid firmware files must have the file extension “.S19.” Any other file extension is not a firmware upgrade and could cause the SMX to cease functioning.
- The original factory-installed firmware is permanently available on the SMX. If the attempted firmware upload fails for any reason, the SMX reverts to the factory-installed firmware.

Operating system:
OS Independent